Page 11 - Turning_catalog_INCH_2022_45_P113-260

USER GUIDE

Negative Chipformers
R3M Chipformer
.008”
3° Double-sided insert for rough machining on stainless steel with a unique deflector
17° geometry to improve chip control. Includes a wavy surface to prevent chip hammering. ISOTURN INSERTS
T3P Chipformer

.012" 10°
Double-sided 6˚ negative flank trigone insert for high feed turning on steel.
19°

TNM Chipformer
.114” .146”
Double-sided trigon for roughing applications. Feed ranges:
8.5˚
from .010 to .026 in/rev. Depth of cut from .08 to .28”.
EM-R Chipformer
.061”
.011”
Double-sided sharp cutting edge with a 13º positive rake angle
13º for machining high temperature alloys at ap <.236”.
21º
HT/WG Chipformer
.012”
8˚ Double-sided for roughing applications. Feed range: .010 to .032 in/rev.
Depth of cut from .08 to .40”.

HM Chipformer
.012”
13˚ Feed range: .003 to .03 in/rev. Depth of cut from .06 to .32”

H3P Chipformer
.01”
• For heavy roughing applications
• Low cutting force for low horse power machines
20°
• Excellent chip control due to changeable land and a flexible chipbreaker
H4P Chipformer
.012” • For heavy roughing applications
• For large depth of cut and high feed
15°
• Strong cutting edge credit to a wide land and large land angle
H5P Chipformer
.012” • For heavy roughing applications
• For large depth of cut and high feed
20° • Extremely strong cutting edge credit to a wide land and large land angle
• Suitable for high cutting conditions
H6P Chipformer

.012”
15˚ Tangential insert with 4 cutting edges for high metal removal on steel up to 1.378” DOC
14˚

123