Page 12 - Turning_catalog_INCH_2022_45_P113-260
P. 12
ISOTURN INSERTS Positive Chipformers Finish machining of steels, stainless steels, high temp alloys, USER GUIDE
F1M-12P
.043"
titanium alloys, and non-ferrous materials. Features positive
geometry, low cutting forces, and excellent surface quality.
12°
F1M-20P
.025"
Semi-finishing and finishing on stainless steel, high-temp alloys,
titanium alloys, and non-ferrous materials. Features a very positive rake
20°
angle, light, and smooth cutting, and excellent surface quality
F3P Chipformer
.04”
.004” Super finishing and finishing applications, mainly on positive
inserts. Feed range: .001-.008 in/rev. DOC .01-.118”.
20°
PF Chipformer
.063"
.006”
Super finishing and finishing applications, mainly on positive
7˚ inserts. Feed range: .001-.008 in/rev. DOC .01-.118”.
SM Chipformer
.07”
.03”
.003” Finishing and boring applications. Feed range: .002-.01 in/rev. DOC .02 - .1”.
18˚
F3M Chipformer
.04”
.004” Chipbreaker with positive rake angle for finishing machining of stainless
20° steel, also suitable for superalloys and exotic materials.
14 Chipformer
.06”
.004”
19˚ Semi-finishing and finishing. Medium feeds.
AS Chipformer
26˚
For general use machining on aluminum and soft materials.
.026”
M3P Chipformer
.051”
.004” Chipbreaker with reinforced cutting edge and positive rake
angles for medium machining steel conditions.
12˚
M3M Chipformer
.051” Chipbreaker with reinforced cutting edge and positive rake angles
.005”
for medium machining stainless steel conditions.
19˚
124 ISCAR