Page 8 - Turning_catalog_INCH_2022_45_P691-914

THREADING PENTA 24-WT ±.0016 .071max 55° .945 .177

Precision Ground Pentagonal
External Threading Inserts
.142
with a Whitworth 55°
RE
Partial Profile

NUT
Dimensions
55°

SCREW
Designation TPIX (2) TPIN (3) RE IC908
PENTA 24A-WT-0.15 (1) 24.00 8.00 .0059 •
PENTA 24A-WT-0.05 (1) 80.00 8.00 .0020 •
• TPIN=64/D(inch) D-nominal thread diameter (inch)
(1) Flat rake (without a chipformer)
(2) Threads per inch maximum
(3) Threads per inch minimum
For tools, see pages: HMSDV PEN (530) • HSTBS-PEN (530) • PCAD RE/LE-JHP (553) • PCADR/L (330) • PCADR/L-JHP (330) • PCHBR/L (332)
• PCHPR/L (329) • PCHR/L-24 (325) • PCHR/L-24-JHP (326)

±.001 .697 Ref.
TIP-WT
Precision Ground Double-Ended
Threading Inserts with a 55° 55°
Partial Profile and a Chipformer RE CW
TIP inserts are 063" longer than GIP in the same pocket
NUT Dimensions Tough 1 Hard
55°

SCREW IC908
Designation CW RE RETOL (2) TPIX (3) TPIN (4) IC08
TIP 2WT-0.05 (1) .094 .002 .0012 54.00 12.00 • •
TIP 4WT-0.15 (1) .157 .006 .0012 19.00 7.00 • •
TIP 5WT-0.25 (1) .217 .010 .0012 12.00 6.00 •
• Toolholder seat needs to be modified according to insert profile to ensure clearance • Pitch max 0187xD
(1) TPIN(thread per inch minimum) = D/64 • D-Diameter of thread (inch)
(2) Corner radius tolerance (+/-)
(3) Threads per inch maximum
(4) Threads per inch minimum
For tools, see pages: C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381) • CGHN-D (291) • CGHN-DG (292)
• CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286) • GHGR/L (287)
• GHMPR/L (283) • GHMR/L (283) • GHSR/L (398) • GHSR/L-JHP-SL (399) • NQCH-GHSR/L-JHP (399)

698 ISCAR