New TANGFACE Tools and TNFPAD adapters with
JETCUT Cooling Holes for Deep Machining and New
HELIFACE HFPAD Adapters with JETCUT Cooling Holes
Highlights
ISCAR introduces two new lines of TANGFACE and HELIFACE tools and adapters with JETCUT cooling holes for face machining operations
TANGFACE MAHPR-XL-...-JHP-MC & TNFPAD-XL ...R/L-...-JHP
A new range of tools and adapters for deep face grooving operations is introduced with the following advantages
Reinforced design enables deep face grooving operation with excellent stability
Great chip evacuation with less chip jamming due to the JETCUT coolant option
Can be used with low pressure coolant up to high pressure of 140 Bar
Cooling hole pinpointed to the cutting edge reduces built up edge and improves tool life
Available for standard TNF inserts 4, 5 and 6mm width
Designed for face grooving depths from 20 - 50mm and diameters from Ø35 -Ø315mm
HELIFACE HFPAD---R/L……JHP
A new range of tools and adapters for deep face grooving operations is introduced with the following advantages
Great chip evacuation with less chip jamming due to the JETCUT coolant option
Can be used with low pressure coolant up to high pressure of 140 Bar
Two cooling holes directed to insert cutting edge, from top and bottom
Cooling hole pinpointed to the cutting edge reduces built up edge and improves tool life
Fits the standard tool holders MAHR/L...JHP & MAHPR/L….JHP
To be used with standard HFPR/L / GRIP / HGPL / DGN inserts 3 - 6.35mm width
Designed for face grooving depths from 10 - 20mm and diameter range from Ø40-Ø3000mm
TEST REPORT
ISCAR - Actual
ISCAR - Test1
Tool
GRIP 4002Y
TNF 4M-IQ
Carbide Grade
IC808
IC808
Major Diameter (mm)
35
35
Minor Diameter (mm)
19
19
Grooving Major Diameter (mm)
35
35
Grooving Minor Diameter (mm)
19
19
Cutting speed Grooving (m/min)
180
180
Feed Grooving (mm/rev)
0.07
0.12
Depth of Cut Groove (mm)
6.2
6.2
Cutting speed Turning (m/min)
180
180
Feed Turning (mm/rev)
0.07
0.12
Depth of Cut Turning (mm)
20.9
20.9
Grooving insert width(mm)
4
4
Parts per Cutting Edge
200
250
Chip Type
Tangled
Tangled
Wear
Flank Wear
Flank Wear
Surface Quality
Good
Good
Reason for Stopping the Test
Bad Chip Formation
Good Results
No. of Corners Tested
6
Needed Surface Quality (Ra/Rz)
10
10
Metal Removal Rate Grooving (cm3/min)
1.44
2.47
MAHPR/L-XL-JHP
Holders with High Pressure Coolant Channels for MODULAR-GRIP Perpendicularly Mounted Adapters
TNFPAD-XL-JHP
Adapters for Face Machining
• WF(assembly)=WF(shank) + WF(adapter)
• TNF 4..5..6 inserts can be used with left and right hand adapters
• Maximum width of cut for the 7 flute cutters is DC
(1) Minimum axial grooving diameter
(2) Maximum axial grooving diameter
HFPAD-JHP
Adapters for Face Machining
• WF(assembly)=WF(shank) + WF(adapter)
• HGN,GRIP,DGN inserts can be used only with right-hand adapters, HGPL inserts with left-hand adapters
(1) Minimum axial grooving diameter
(2) Maximum axial grooving diameter
• WF(assembly)=WF(shank) + WF(adapter)
• WF(assembly)=WF(shank) + WF(adapter)
