Page 8 - Aluminum_Machining_catalog_2023
P. 8
USER GUIDE
ISOTURN ISOTURN Negative Chipformers NF Chipformer
1.42 double-sided for semi-finishing and finishing applications. low cutting
4º
0.4 forces are due to a very sharp edge and positive rake.
Gn Chipformer
double-sided for general applications.
F3n Chipformer
24°
polished and extra sharp positive insert for machining aluminum
and non-ferrous materials for finishing applications.
Tf Chipformer
double-sided positive rake angles to prevent strain hardening.
the rake angle varies along the edge to a negative angle which prevents chipping.
Pp Chipformer
double-sided, very positive rake, sharp- and positive radial edge for aluminum alloys.
M3n Chipformer
24°
polished and extra sharp positive insert for machining aluminum
and non-ferrous materials for medium applications.
12 Chipformer
21˚ 2.7
10˚ 0.08
single-sided for medium to rough machining on aluminum and soft materials.
Positive Chipformers
SM Chipformer
1.8
0.7
0.07 finishing and boring applications. feed range: 0.06-0.25 mm/rev. doc 0.5-2.5 mm.
18˚
14 Chipformer
1.5
0.1
19˚ semi-finishing and finishing. medium feeds.
As Chipformer
26˚
for general use machining on aluminum and soft materials.
0.65
R3n Chipformer
19° 35° rhombic, double-sided sharp-edged positive and polished rake
inserts. used for rough machining on soft and non-ferrous materials.
soft cut and low cutting forces eliminate built-up edg
6 ISCAR