Page 17 - Turning_catalog_INCH_2022_45_P691-914

±.001 .197
TIPI-MT 8° .618 Ref
Precision Ground Double-Ended
Internal Threading Inserts with CW 60° THREADING
60° Partial Profile and Chipformer RE
for.787" Min. Bore Dia.
NUT
60° Dimensions Tough 1 Hard

SCREW
Designation CW RE RETOL (1) TPN (mm) (2) TPIX (3) TPIN (4) TPX (mm) (5) IC08 IC908
TIPI 3.4MT-0.10 .134 .004 .0012 1.800 14.00 8.00 3.180 • •
TIPI 5.4MT-0.20 .213 .008 .0012 3.190 8.00 5.00 5.100 • •
• Toolholder seat needs to be modified according to insert profile to ensure clearance • Pitch max 0205xD, TPI min D/48
• D=Diameter of thread (pitch max<=CW) • TIPI inserts are 063" longer than GIPI in the same pocket
(1) Corner radius tolerance (+/-)
(2) Thread pitch minimum (mm)
(3) Threads per inch maximum
(4) Threads per inch minimum
(5) Thread pitch maximum (mm)
For tools, see pages: AVC-GAIR/L (371) • CGIN 26 (372) • GAIR/L (370) • GHIR-SC (W=079-138) (369) • GHIR/L (W=078-252) (368)
• GHIR/L-C (W=157-252) (368)

INSL
S

60° PARTIAL PROFILE PDX
THREADING FLTF
Double-Ended Precision Flat 60˚ BW
Top Threading Inserts RE 3˚
Right-hand shown

NUT
60° Dimensions

SCREW
Designation TPIN (1) TPIX (2) TPIN_DF2 (3) TPIX_DF2 (4) RE PDX BW S INSL TPN_DF2 TPX_DF2 IC908
FLTF-3R/L 9.00 24.00 10.00 44.00 .0030 .1417 .195 .344 .890 2.500 1.750 •
FLTF-4R/L 9.00 24.00 10.00 44.00 .0030 .2008 .255 .453 1.120 2.500 1.750 •
FLTF-2R/L 12.00 24.00 14.00 44.00 .0030 .1102 .150 .219 .514 .600 1.750 •
• DMIN according to related boring bar • For 60° V-thread limits, see page 784-785
(1) TPI int min
(2) TPI int max
(3) TPI ext min
(4) TPI ext max
For tools, see pages: A-FLER/L (349) • FLASR/L (348) • FLSR/L (347) • H-FLER (349)
INSL

5˚ S

60° PARTIAL PROFILE PDX
THREADING FLTK
Double-Ended Precision Positive 60˚ BW
Rake Threading Inserts RE 3˚
Right-hand shown

NUT
60° Dimensions

SCREW
Designation TPIN (1) TPIX (2) TPIN_DF2 (3) TPIX_DF2 (4) RE TTP PDX BW S INSL IC908
FLTK-3R/L 9.00 24.00 10.00 44.00 .0030 BOTH .1417 .195 .344 .890 •
FLTK-4R/L 9.00 24.00 10.00 44.00 .0030 BOTH .2008 .255 .453 1.120 •
FLTK-2R/L 12.00 24.00 14.00 44.00 .0030 BOTH .1102 .150 .219 .514 •
• DMIN according to related boring bar • For 60° V-thread limits, see page 784-785
(1) TPI int min
(2) TPI int max
(3) TPI ext min
(4) TPI ext max
For tools, see pages: A-FLER/L (349) • FLASR/L (348) • FLSR/L (347) • H-FLER (349)
707